您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 3933.3-2002 升降台铣床检验条件 精度检验 第3部分:立式铣床

时间:2024-05-11 18:48:19 来源: 标准资料网 作者:标准资料网 阅读:8109
下载地址: 点击此处下载
基本信息
标准名称:升降台铣床检验条件 精度检验 第3部分:立式铣床
英文名称:Test conditions for milling machines with table of variable height--Testing of accuracy--Part 3:Machines with vertical spindle
中标分类: 机械 >> 金属切削机床 >> 钻、镗、铣床
ICS分类: 机械制造 >> 机床 >> 镗床和铣床
替代情况:GB/T 3933-1983
发布部门:中华人民共和国国家质量监督检验检疫总局
发布日期:2002-09-13
实施日期:2003-04-01
首发日期:1983-11-09
作废日期:1900-01-01
主管部门:中国机械工业联合会
提出单位:中国机械工业联合会
归口单位:全国金属切削机床标准化技术委员会
起草单位:北京铣床所
起草人:胡瑞琳、王晓慧
出版社:中国标准出版社
出版日期:2003-04-01
页数:平装16开, 页数:14, 字数:25千字
书号:155066.1-19244
适用范围

本部分规定了立式升降台铣床的几何精度检验和工作精度检验的要求及检验方法。本部分适用于工作台面宽度200 mm~500 mm一般用途的普通精度立式升降台铣床。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 金属切削机床 钻 镗 铣床 机械制造 机床 镗床和铣床
基本信息
标准名称:高石英瓷器
英文名称:High-silica porcelain ware
中标分类: 轻工、文化与生活用品 >> 日用玻璃、陶瓷、搪瓷、塑料制品 >> 日用陶瓷制品
ICS分类: 玻璃和陶瓷工业 >> 陶瓷 >> 陶瓷制品
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2011-12-30
实施日期:2012-08-01
首发日期:2011-12-30
作废日期:
主管部门:全国日用陶瓷标准化技术委员会(SAC/TC 405)
提出单位:中国轻工联合会
归口单位:全国日用陶瓷标准化技术委员会(SAC/TC 405)
起草单位:山东硅元新型材料有限责任公司、山东硅苑新材料科技股份有限公司、山东省陶瓷公司、淄博博纳科技发展有限公司、中国陶瓷工业协会
起草人:任允鹏、曾德斌、樊震坤、李伦、王家胜
出版社:中国标准出版社
出版日期:2012-08-01
页数:16页
适用范围

本标准规定了高石英瓷器的产品分类、等级划分、技术要求、试验方法、检验规则及标志、包装、运输、贮存。
本标准适用于以石英或富含二氧化硅矿物为主要原料的日用瓷器。

前言

没有内容

目录

没有内容

引用标准

下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件,仅注日期的版本适用于本文
件。凡是不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。
GB/T2828.1—2003 计数抽样检验程序 第1部分:按接收质量限(AQL)检索的逐批检验抽样计划
GB/T2829—2002 周期检验计数抽样程序及表(适用于对过程稳定性的检验)
GB/T3295 陶瓷制品45°镜向光泽度试验方法
GB/T3298 日用陶瓷器抗热震性测定方法
GB/T3299 日用陶瓷器吸水率测定方法
GB/T3300 日用陶瓷器变形检验方法
GB/T3301 日用陶瓷器的容积、口径误差、高度误差、重量误差、缺陷尺寸的测定方法
GB/T3302 日用陶瓷器包装、标志、运输、贮存规则
GB/T3303 日用陶瓷器缺陷术语
GB/T3534 日用陶瓷器铅、镉溶出量的测定方法
GB/T4734 陶瓷材料及制品化学分析方法
GB/T5000 日用陶瓷名词术语
GB12651 与食物接触的陶瓷制品铅、镉溶出量允许极限
GB/T27587 日用陶瓷耐微波加热测试方法
QB/T1503 日用陶瓷白度测定方法
QB/T1993 日用陶瓷抗冲击强度测定方法
QB/T3731 日用陶瓷器釉面维氏硬度测定方法

所属分类: 轻工 文化与生活用品 日用玻璃 陶瓷 搪瓷 塑料制品 日用陶瓷制品 玻璃和陶瓷工业 陶瓷 陶瓷制品
【英文标准名称】:StandardonLifeSafetyRopeandEquipmentforEmergencyServices
【原文标准名称】:应急服务用安全绳和设备标准
【标准号】:ANSI/NFPA1983-2011
【标准状态】:现行
【国别】:美国
【发布日期】:2011
【实施或试行日期】:
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:ANSI
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:Firefighting;Healthprotection;Protectiveequipment;Rescueequipment;Safetyharnesses
【摘要】:1.1Scope.1.1.1Thisstandardshallspecifyminimumdesign,performance,testing,andcertificationsrequirementsforlifesafetyrope,escaperope,waterrescuethrowlines,lifesafetyharnesses,belts,andauxiliaryequipmentforemergencyservicespersonnel.1.1.2Thisstandardshallspecifyrequirementsfornewlifesafetyrope,escaperope,waterrescuethrowlines,lifesafetyharnesses,belts,andauxiliaryequipment.1.1.3Thisstandardshallnotspecifyrequirementsforanyaccessoriesthatcouldbeattachedtothecertifiedproduct,butarenotnecessaryforthecertifiedproducttomeettherequirementsofthisstandard.1.1.4Thisstandardshallnotspecifyrequirementsforanyutilityrope.1.1.5Thisstandardshallnotspecifyrequirementsforanyropeorassociatedequipmentdesignedformountainrescue,caverescue,leadclimbingoperations,orwhereexpectedhazardsandsituationsdictateotherperformancerequirements.1.1.6*Thisstandardshallnotspecifyrequirementsforanyropeorequipmentforfallprotectionpertainingtoemployeesofgeneralindustryortheconstructionanddemolitionindustry.1.1.7Thisstandardshallnotbeconstruedasaddressingallofthesafetyconcernsassociatedwiththeuseofcompliantlifesafetyropeorassociatedequipment.Itshallbetheresponsibilityofthepersonsandorganizationsthatusecompliantlifesafetyropeorassociatedequipmenttoestablishsafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.1.1.8Thisstandardshallnotbeconstruedasaddressingallofthesafetyconcerns,ifany,associatedwiththeuseofthisstandardbytestingfacilities.Itshallbetheresponsibilityofthepersonsandorganizationsthatusethisstandardtoconducttestingoflifesafetyropetoestablishsafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortousingthisstandardforanydesigning,manufacturing,andtesting.1.1.9Nothinghereinshallrestrictanyjurisdictionormanufacturerfromexceedingtheseminimumrequirements.
【中国标准分类号】:C84
【国际标准分类号】:13_340_60
【页数】:
【正文语种】:英语