您的位置: 标准下载 » 国内标准 » 行业标准 »

JG/T 5012-1992 建筑机械与设备包装通用技术条件

时间:2024-05-12 18:50:17 来源: 标准资料网 作者:标准资料网 阅读:9946
下载地址: 点击此处下载
基本信息
标准名称:建筑机械与设备包装通用技术条件
英文名称:Consruction machinery and equipment General specification for product packages
中标分类: 工程建设 >> 施工机械设备 >> 施工机械设备综合
ICS分类: 建筑材料和建筑物 >> 施工设备
替代情况:替代JJ 17-83
发布部门:中华人民共和国建设部
发布日期:1992-06-25
实施日期:1993-03-01
首发日期:1900-01-01
作废日期:2010-01-01
提出单位:建设部标准定额研究所
归口单位:建设部机械设备与车辆标准技术归口单位北京建筑机械综合研究所
起草单位:抚顺挖掘机制造厂、建设部北京建筑机械综合研究所
起草人:胡素坤
出版社:中国建筑工业出版社
出版日期:1993-03-01
页数:9页
适用范围

本标准规定了建筑机械与设备产品的包装技术要求、试验方法、检验规则、包装标志与随机文件等。本标准适用于建筑机械与设备产品及其零部件的包装。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 工程建设 施工机械设备 施工机械设备综合 建筑材料和建筑物 施工设备
Product Code:SAE J2337/3
Title:Connections for Fluid Power and High Pressure Use-Ports, Stud Ends, and Plugs With Iso 261 Threads and O-Rings Sealing-Part 3: Port Plug Requirements, Dimensions, Design, and Test Methods
Issuing Committee:Hydraulic Tube Fittings Committee
Scope:PurposeThis part of SAE J2337 specifies dimensions, design, and performance requirements for eight plugs using a conical seal to insure leak proof performance with a design factor of 4 to 1.Field of ApplicationThese connectors are intended for general and hydraulic systems on industrial equipment and commercial products, where elastomeric seals are acceptable to overcome leakage and variations in assembly procedures. These connectors are capable of providing leak proof full flow connections in hydraulic systems operating from 95 kPa vacuum to the working pressures shown in Table 1. Since many factors influence the pressure at which hydraulic systems will or will not perform satisfactorily, these values should not be construed as guaranteed minimums. For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and manufacturer to ensure that the required performance levels are met.For use of these connectors in conditions outside the pressure and temperature limits specified, contact the manufacturer.【英文标准名称】:Unboundandhydraulicallyboundmixtures-Part43:testmethodforthedeterminationofthemodulusofelasticityofhydraulicallyboundmixtures.
【原文标准名称】:松散的和液力粘合的混合料.第43部分:测定液力粘合混合料弹性模数的试验方法
【标准号】:NFP98-846-43-2003
【标准状态】:现行
【国别】:法国
【发布日期】:2003-09-01
【实施或试行日期】:2003-09-05
【发布单位】:法国标准化协会(FR-AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:试样;试样;规范(验收);试验条件;施工材料;实验室试验;建筑材料;路面(道路);密度测定法;弹性模量;粘合;粒度分选;弹性(流体);团料;混合物;抽样方法;含量测定;抗拉试验;样品分割;定义;测定;建材混合料;密度;矿质集料;粒状材料;公路建设;松散的;压缩试验;试验;试样制备;液压的;建筑;岩石
【英文主题词】:Bound;Buildingmaterialmixtures;Buildingmaterials;Compressiontesting;Conglomerates;Construction;Constructionmaterials;Definition;Definitions;Densimetry;Density;Determination;Determinationofcontent;Elasticproperties(fluids);Grainsizing;Hydraulic;Laboratorytesting;Mineralaggregates;Mixtures;Modulusofelasticity;Particulatematerials;Pavements(roads);Roadconstruction;Rocks;Sampledivision;Samples;Samplingmethods;Specification(approval);Specimenpreparation;Tensiletesting;Testspecimens;Testing;Testingconditions;Unbound
【摘要】:
【中国标准分类号】:Q27
【国际标准分类号】:93_080_20
【页数】:14P.;A4
【正文语种】:其他